prikaz prve stranice dokumenta Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion
  Download
PDF 617.36 KB
Scientific paper - Preliminary note / Short communication
Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion
Metalurgija, 62 (2023), 2; 285-288. urn:nbn:hr:151:853149
Vidaković, I.; Heffer, G.; Špada, V.; Samardžić, Iva

Cite this document

Vidaković, I., Heffer, G., Špada, V. & Samardžić, I. (2023). Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion. Metalurgija, 62. (2), 285-288. Retrieved from https://urn.nsk.hr/urn:nbn:hr:151:853149

Vidaković, I., et al. "Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion." Metalurgija, vol. 62, no. 2, 2023, pp. 285-288. https://urn.nsk.hr/urn:nbn:hr:151:853149

Vidaković, I., G. Heffer, V. Špada and Iva Samardžić. "Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion." Metalurgija 62, no. 2 (2023): 285-288. https://urn.nsk.hr/urn:nbn:hr:151:853149

Vidaković, I., et al. (2023) 'Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion', Metalurgija, 62(2), pp. 285-288. Available at: https://urn.nsk.hr/urn:nbn:hr:151:853149 (Accessed 12 December 2024)

Vidaković I, Heffer G, Špada V, Samardžić I. Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion. Metalurgija [Internet]. 2023 March 04 [cited 2024 December 12];62(2):285-288. Available at: https://urn.nsk.hr/urn:nbn:hr:151:853149

I. Vidaković, G. Heffer, V. Špada and I. Samardžić, "Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion", Metalurgija, vol. 62, no. 2, pp. 285-288, March 2023. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:151:853149. [Accessed: 12 December 2024]

Please login to the repository to save this object to your list.
Metadata
Title (english)Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion
AuthorI. Vidaković
AuthorG. Heffer
AuthorV. Špada
AuthorIva Samardžić
Author's institutionJosip Juraj Strossmayer University of Osijek
Faculty of Agrobiotechnical Sciences Osijek
(Department of Agricultural Engineering and Renewable Energy Resources)
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Agronomy
Agricultural Engineering and Technology
Abstract (english)
The experiment was focused on comparison of mass loss exhibited by induction-hardened and gas-nitrided samples made of 42CrMo4 steel. The mass loss was caused by abrasive wear, i.e. by motion of the abrasive particles. Wear testing was performed with different input parameters (sample velocity and impact angle of abrasive particles and the tested surface). This experiment proceeded with metallographic analysis performed by an optical microscope and by imaging of wear path done by scanning electron microscopy (SEM), to conclude with the statistical analysis of obtained data. The conducted experiment determined that the gas-nitrided samples lost less mass at all levels of input parameters than the induction-hardened samples.
Keywords (english)
Languageenglish
Publication typeScientific paper - Preliminary note / Short communication
Publication statusPublished
Peer reviewPeer review - domestic
Publication versionPublished version
Journal titleMetalurgija
Numberingvol. 62, no. 2, pp. 285-288
p-ISSN0543-5846
e-ISSN1334-2576
URN:NBNurn:nbn:hr:151:853149
Publication2023-03-04
Document URLhttps://hrcak.srce.hr/290115
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-06-03 14:00:36