prikaz prve stranice dokumenta Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion
  Preuzmi
PDF 617.36 KB
Znanstveni rad - Prethodno/kratko priopćenje
Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion
Metalurgija, 62 (2023), 2; 285-288. urn:nbn:hr:151:853149
Vidaković, I.; Heffer, G.; Špada, V.; Samardžić, Iva

Citirajte ovaj rad

Vidaković, I., Heffer, G., Špada, V. i Samardžić, I. (2023). Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion. Metalurgija, 62. (2), 285-288. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:151:853149

Vidaković, I., et al. "Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion." Metalurgija, vol. 62, br. 2, 2023, str. 285-288. https://urn.nsk.hr/urn:nbn:hr:151:853149

Vidaković, I., G. Heffer, V. Špada i Iva Samardžić. "Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion." Metalurgija 62, br. 2 (2023): 285-288. https://urn.nsk.hr/urn:nbn:hr:151:853149

Vidaković, I., et al. (2023) 'Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion', Metalurgija, 62(2), str. 285-288. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:151:853149 (Datum pristupa: 17.11.2024.)

Vidaković I, Heffer G, Špada V, Samardžić I. Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion. Metalurgija [Internet]. 04.03.2023. [pristupljeno 17.11.2024.];62(2):285-288. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:151:853149

I. Vidaković, G. Heffer, V. Špada i I. Samardžić, "Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion", Metalurgija, vol. 62, br. 2, str. 285-288, Ožujak 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:151:853149. [Citirano: 17.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:151:853149
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Comparison of wear resistance of induction-hardened and gas-nitrided samples in the abrasive mass motion
AutorI. Vidaković
AutorG. Heffer
AutorV. Špada
AutorIva Samardžić
Autorova ustanovaSveučilište Josipa Jurja Strossmayera u Osijeku
Fakultet agrobiotehničkih znanosti Osijek
(Zavod za poljoprivrednu tehniku i obnovljive izvore energije)
Znanstveno / umjetničko
područje, polje i grana		BIOTEHNIČKE ZNANOSTI
Poljoprivreda (agronomija)
Poljoprivredna tehnika i tehnologija
Sažetak (engleski)
The experiment was focused on comparison of mass loss exhibited by induction-hardened and gas-nitrided samples made of 42CrMo4 steel. The mass loss was caused by abrasive wear, i.e. by motion of the abrasive particles. Wear testing was performed with different input parameters (sample velocity and impact angle of abrasive particles and the tested surface). This experiment proceeded with metallographic analysis performed by an optical microscope and by imaging of wear path done by scanning electron microscopy (SEM), to conclude with the statistical analysis of obtained data. The conducted experiment determined that the gas-nitrided samples lost less mass at all levels of input parameters than the induction-hardened samples.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Prethodno/kratko priopćenje
Status objaveObjavljen
Vrsta recenzijeRecenziran - domaća recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMetalurgija
Brojčani podacivol. 62, br. 2, str. 285-288
p-ISSN0543-5846
e-ISSN1334-2576
URN:NBNurn:nbn:hr:151:853149
Datum objave publikacije2023-03-04
URL dokumentahttps://hrcak.srce.hr/290115
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-06-03 14:00:36